【Router】
当前路由器提示视图 | 依次输入的配置命令，重要的命令红色突出显示 | 简单说明 |
| ! | 适用版本vrp1.74及1.44 |
[Router] | ! |
|
[Router] | interface Ethernet0 |
|
[Router-Ethernet0] | ip address 10.0.0.1 255.255.255.0 |
|
| ! |
|
[Router] | interface Serial0 |
|
[Router-Serial0] | link-protocol ppp |
|
| ! |
|
[Router] | interface Bri0 |
|
[Router-Bri0] | link-protocol ppp |
|
[Router-Bri0] | dialer in-band |
|
| ! |
|
| quit |
|
[Router] | snmp-agent | 使能snmp服务 |
[Router] | snmp-agent local-engineid 800007DB0300E0FC0F6256 | 全网唯一设备引擎ID |
[Router] | snmp-agent community read isPublic | 设置读团体名:isPublic |
[Router] | snmp-agent community write isPrivate | 设置写团体名:isPrivate |
[Router] | snmp-agent sys-info version all | 选择网管snmpv1/v2/v3 |
[Router] | snmp-agent sys-info contact 010-12345678 | 联系电话:010-12345678 |
[Router] | snmp-agent target-host trap address 10.0.0.10 port 69 parameters v1 securityname aaa | 设置trap接收主机10.0.0.10 |
[Router] | snmp-agent sys-info location Huawei Tech. Beijing, China | 路由器位置 |
[Router] | snmp-agent trap enable standard authentication coldstart linkdown linkup warmstart | Trap的内容standard authentication coldstart linkdown linkup warmstart |
[Router] | snmp-agent trap enable system | Trap的内容system |
| ! |
|
『注意』
1.网管的community name应该与路由器上配置一致
2.缺省配置下community read name为public, community write name为private
